Shipping from China to Chiba
China → Chiba · via NRT air / Chiba sea · clearance by Japan Customs (税関)
Freight from China into Chiba clears through NRT air / Chiba sea. Chiba is industrial and petrochemical zone east of Tokyo, and the inland leg is same-day, so the clearance date is effectively the delivery date.
Clearance itself is handled by Japan Customs (税関), and typical dwell at the gateway runs 1–3 days.
What you will pay on arrival in Japan
Imports into Japan are cleared by Japan Customs (税関). The headline position is: Consumption tax 10%; duty 0–15% on most manufactured goods, higher on leather, footwear and food. The de-minimis threshold is JPY 10,000 customs value (some categories excluded).
Conformity is the part most first-time importers underestimate: PSE mark for electrical appliances; Giteki/MIC certification for radio devices; Food Sanitation Act notification for food-contact items. Getting this wrong is expensive because it usually cannot be fixed after the cargo has landed.
Restrictions and known friction points for Japan: Electrical products without a valid PSE mark cannot be imported. Radio devices need Giteki certification. Amazon FBA Japan requires an Importer of Record that is not Amazon, so confirm who the IOR will be before booking a DDP move.
Routing and transit on this lane
Japan is a fast, high-compliance lane: Shanghai and Qingdao to Tokyo or Osaka is 3–6 days by sea and often next-day by air. Clearance itself is quick, but the standards regime is unforgiving — PSE and Giteki marking must be correct before the goods ship, because there is no way to remediate at the border.
| Air gateways used | NRT (Narita), HND (Haneda), KIX (Osaka Kansai) |
|---|---|
| Air transit, China to gateway | 1–3 business days |
| Sea gateways used | Tokyo, Yokohama, Osaka |
| Sea transit, China to gateway | 3–6 calendar days |
| Gateway serving Chiba | NRT air / Chiba sea |
| Inland leg to Chiba | Same day from the gateway |
| Typical clearance / dwell | 1–3 days |
| Peak season to plan around | Sep–Nov |
Pre-shipment checklist for Chiba
- Get the conformity paperwork moving early: PSE mark for electrical appliances; Giteki/MIC certification for radio devices; Food Sanitation Act notification for food-contact items.
- Book earlier than the transit time suggests during Sep–Nov, when space on this lane tightens.
- Confirm the consignee in Chiba can act as importer of record — Japan Customs (税関) will not release cargo to an unregistered party.
- Compare gross weight against volumetric weight (L×W×H ÷ 6000) — the higher figure is what gets billed on air and express.
- Check the de-minimis position (JPY 10,000 customs value (some categories excluded)) against your invoice value before you decide how to split the shipment.
- Photograph carton markings and seal numbers before departure — it makes any claim far easier to settle.
Air, sea or overland into Chiba?
| Mode | Transit to gateway | Best suited to |
|---|---|---|
| ✈️ Air Freight | 1–3 business days | time-critical, high-value and low-volume cargo |
| 🚢 Sea Freight | 3–6 calendar days | volume cargo where cost per kilo matters more than speed |
Transit shown is China departure to the Japan gateway and excludes the same-day inland leg to Chiba and 1–3 days of clearance.
Mode guides for Chiba
Frequently asked questions
How long does shipping from China to Chiba take?
China to the Japan gateway is 1–3 business days by air, 3–6 calendar days by sea. On top of that, allow 1–3 days of clearance with Japan Customs (税関) and a same-day inland leg to Chiba.
What duty and tax will I pay importing into Chiba?
Japan Customs (税関) applies: Consumption tax 10%; duty 0–15% on most manufactured goods, higher on leather, footwear and food. The de-minimis position is JPY 10,000 customs value (some categories excluded). Under a DDP arrangement these are pre-paid, so nothing is collected on arrival in Chiba.
What documents does Japan Customs (税関) require?
A commercial invoice with HS codes, a packing list, the bill of lading or air waybill, a certificate of origin where it lowers duty, and any product certification (PSE mark for electrical appliances; Giteki/MIC certification for radio devices; Food Sanitation Act notification for food-contact items). We prepare and file these as part of the service.
What certification do I need for Japan?
For regulated goods, plan for: PSE mark for electrical appliances; Giteki/MIC certification for radio devices; Food Sanitation Act notification for food-contact items. Missing conformity paperwork is the single most common cause of a hold, and in most cases it cannot be remedied once the cargo has arrived.
How is the chargeable weight calculated for Chiba?
We compare actual gross weight against volumetric weight — length × width × height in centimeters divided by 6000 for air — and bill the greater of the two, rounded up to the next kilogram. Light, bulky cargo is almost always billed on volume.
Is sea freight cheaper than air freight into Chiba?
Per kilo, yes — usually by a wide margin. The trade-off is time: 3–6 calendar days by sea versus 1–3 business days by air to the Japan gateway, before clearance and the same-day inland leg. The crossover point is normally somewhere between 100 and 300 kg depending on the density of your cargo.
Other delivery cities in Japan
References & official sources
Duty rates, thresholds and conformity requirements for Japan change by ministerial decision, sometimes mid-year. The figures on this page are buyer-planning references, not a customs ruling — confirm the current position for your own HS code with Japan Customs (税関) or your broker before you ship.
- Japan Customs
- METI — Electrical Appliance and Material Safety Act (PSE)
- MIC — radio equipment certification
- WTO — Tariff Profiles (applied MFN duty by country)
- IATA — Lithium battery shipping guidance (PI 965–970)
- World Bank — Logistics Performance Index
- ICC — Incoterms 2020 rules (DDP, DAP, FOB definitions)
- IPPC — ISPM 15 wood packaging standard
Page data last reviewed: November 2026.
Shipping by industry
This page covers the route and clearance picture for the destination. Packing, classification and the compliance step that actually holds a shipment depend on what you are sending — these guides cover that by commodity.
- Pallet Wood, Bamboo & Paper Products
- Conveyor Belts Plastics, Rubber & Packaging
- Hotel Furniture Furniture & Home Products
- Textiles Textiles, Apparel, Footwear & Leather
- Restaurant Furniture Retail, Display & Commercial Fixtures
- Metal Fabrication Metal Products & Industrial Components
- Pressure Vessels Metal Products & Industrial Components
- Switchgear New Energy, Power & Electrical
- Doors & Windows Building Materials & Construction Products
- Corrugated Packaging Wood, Bamboo & Paper Products
- Glass Packaging Plastics, Rubber & Packaging
- Kitchenware Furniture & Home Products
Checking the Japan duty position yourself
We publish these figures so you can budget, but the assessment that binds is the one Japan Customs makes on your declaration. Where a shipment is large enough that a percentage point matters, check their current tariff guidance rather than ours.
Classification drives everything downstream: the same carton can attract very different duty depending on the heading it lands in, and the structure those headings come from is the World Customs Organization Harmonized System. If your product sits near a boundary between two headings, resolve it before shipping rather than at the border.
For ocean cargo, restricted commodities move under the IMO's IMDG Code, and the container has to be declared and stowed accordingly. Batteries, flammables and corrosives all have a compliant ocean path; what causes rolled bookings is finding out about them after the container is packed.
For a wider view of how importing into Japan actually works — documentation norms, inspection behavior, the paperwork that tends to hold shipments — the U.S. ITA guide to Japan customs regulations is a useful independent read alongside our own lane notes.
Watch: the process behind this route
This guide covers routing and clearance for Chiba. The video below covers the wider shipping process that sits around it.
The Customs Clearance Process: A Comprehensive Guide — ShipERP by ERP Integrated Solutions. Published on YouTube by a third party; we link it because it explains the process well, not because we produced it or endorse the provider.
Customs clearance in Japan
Duty and tax position, certification, typical port dwell and what actually holds shipments at this border — plus who files the entry.
Japan clearance requirements →Priced routes to Japan
- Shekou to Hitachinaka FCL Ocean Freight Rates | 20GP & 40HQ
- Shipping a Container from Shekou to Tokyo: Cost & Transit
- Nansha to Moji FCL Ocean Freight Rates | 20GP & 40HQ
- Shekou to Moji FCL Ocean Freight Rates | 20GP & 40HQ
- Shipping a Container from Shekou to Yokohama: Cost & Transit
- Nansha to Osaka FCL Ocean Freight Rates | 20GP & 40HQ