Air Freight from China to Kawasaki
China → Kawasaki · via HND air / Tokyo sea · clearance by Japan Customs (税関)
For buyers shipping into Kawasaki, the practical question is not the ocean or flight time but what happens after arrival. Kawasaki is heavy industry and logistics corridor; cargo enters through HND air / Tokyo sea, and the inland leg is same-day, so the clearance date is effectively the delivery date.
Clearance itself is handled by Japan Customs (税関), and typical dwell at the gateway runs 1–3 days.
How this lane actually runs
Japan is a fast, high-compliance lane: Shanghai and Qingdao to Tokyo or Osaka is 3–6 days by sea and often next-day by air. Clearance itself is quick, but the standards regime is unforgiving — PSE and Giteki marking must be correct before the goods ship, because there is no way to remediate at the border.
| Air gateways used | NRT (Narita), HND (Haneda), KIX (Osaka Kansai) |
|---|---|
| Air transit, China to gateway | 1–3 business days |
| Gateway serving Kawasaki | HND air / Tokyo sea |
| Inland leg to Kawasaki | Same day from the gateway |
| Typical clearance / dwell | 1–3 days |
| Peak season to plan around | Sep–Nov |
Duty, tax and clearance into Kawasaki
Japan Customs (税関) assesses duty and tax on cargo arriving for Kawasaki consignees. Current regime: Consumption tax 10%; duty 0–15% on most manufactured goods, higher on leather, footwear and food, with a de-minimis position of JPY 10,000 customs value (some categories excluded).
Conformity is the part most first-time importers underestimate: PSE mark for electrical appliances; Giteki/MIC certification for radio devices; Food Sanitation Act notification for food-contact items. Getting this wrong is expensive because it usually cannot be fixed after the cargo has landed.
Restrictions and known friction points for Japan: Electrical products without a valid PSE mark cannot be imported. Radio devices need Giteki certification. Amazon FBA Japan requires an Importer of Record that is not Amazon, so confirm who the IOR will be before booking a DDP move.
Pre-shipment checklist for Kawasaki
- Put the Kawasaki delivery address, contact name and phone number on the invoice, not just the packing list.
- Compare gross weight against volumetric weight (L×W×H ÷ 6000) — the higher figure is what gets billed on air and express.
- Book earlier than the transit time suggests during Sep–Nov, when space on this lane tightens.
- Photograph carton markings and seal numbers before departure — it makes any claim far easier to settle.
- Check the de-minimis position (JPY 10,000 customs value (some categories excluded)) against your invoice value before you decide how to split the shipment.
- Get the conformity paperwork moving early: PSE mark for electrical appliances; Giteki/MIC certification for radio devices; Food Sanitation Act notification for food-contact items.
Frequently asked questions
How long does shipping from China to Kawasaki take?
China to the Japan gateway is 1–3 business days. On top of that, allow 1–3 days of clearance with Japan Customs (税関) and a same-day inland leg to Kawasaki.
What duty and tax will I pay importing into Kawasaki?
Japan Customs (税関) applies: Consumption tax 10%; duty 0–15% on most manufactured goods, higher on leather, footwear and food. The de-minimis position is JPY 10,000 customs value (some categories excluded). Under a DDP arrangement these are pre-paid, so nothing is collected on arrival in Kawasaki.
What documents does Japan Customs (税関) require?
A commercial invoice with HS codes, a packing list, the bill of lading or air waybill, a certificate of origin where it lowers duty, and any product certification (PSE mark for electrical appliances; Giteki/MIC certification for radio devices; Food Sanitation Act notification for food-contact items). We prepare and file these as part of the service.
Is sea freight cheaper than air freight into Kawasaki?
Per kilo, yes — usually by a wide margin. The trade-off is time: 3–6 calendar days by sea versus 1–3 business days by air to the Japan gateway, before clearance and the same-day inland leg. The crossover point is normally somewhere between 100 and 300 kg depending on the density of your cargo.
What certification do I need for Japan?
For regulated goods, plan for: PSE mark for electrical appliances; Giteki/MIC certification for radio devices; Food Sanitation Act notification for food-contact items. Missing conformity paperwork is the single most common cause of a hold, and in most cases it cannot be remedied once the cargo has arrived.
How is the chargeable weight calculated for Kawasaki?
We compare actual gross weight against volumetric weight — length × width × height in centimeters divided by 6000 for air — and bill the greater of the two, rounded up to the next kilogram. Light, bulky cargo is almost always billed on volume.
Other delivery cities in Japan
References & official sources
Duty rates, thresholds and conformity requirements for Japan change by ministerial decision, sometimes mid-year. The figures on this page are buyer-planning references, not a customs ruling — confirm the current position for your own HS code with Japan Customs (税関) or your broker before you ship.
- Japan Customs
- METI — Electrical Appliance and Material Safety Act (PSE)
- MIC — radio equipment certification
- WTO — Tariff Profiles (applied MFN duty by country)
- IATA — Lithium battery shipping guidance (PI 965–970)
- World Bank — Logistics Performance Index
- ICC — Incoterms 2020 rules (DDP, DAP, FOB definitions)
- IPPC — ISPM 15 wood packaging standard
Page data last reviewed: November 2026.
Shipping by industry
This page covers the route and clearance picture for the destination. Packing, classification and the compliance step that actually holds a shipment depend on what you are sending — these guides cover that by commodity.
- Home Decor Furniture & Home Products
- Technical Textiles Textiles, Apparel, Footwear & Leather
- Outdoor Products Toys, Sports, Outdoor & Leisure
- Fasteners Metal Products & Industrial Components
- Electric Motors General Machinery & Industrial Equipment
- Wire & Cable New Energy, Power & Electrical
- Wall Panels Building Materials & Construction Products
- Injection Molded Parts Plastics, Rubber & Packaging
- Furniture Furniture & Home Products
- Home Storage Products Furniture & Home Products
- Exhibition Display Equipment Retail, Display & Commercial Fixtures
- Aluminum Coils Steel & Metal Materials
Checking the Japan duty position yourself
We publish these figures so you can budget, but the assessment that binds is the one Japan Customs makes on your declaration. Where a shipment is large enough that a percentage point matters, check their current tariff guidance rather than ours.
Classification drives everything downstream: the same carton can attract very different duty depending on the heading it lands in, and the structure those headings come from is the World Customs Organization Harmonized System. If your product sits near a boundary between two headings, resolve it before shipping rather than at the border.
On the air side, anything with a cell or a battery in it, plus liquids, powders, magnets and aerosols, is governed by the IATA Dangerous Goods Regulations. Those articles are not refused outright, but they need to be declared at booking so the shipment is built correctly — declaring them late is the single most common cause of an air consignment being offloaded.
If this is your first shipment into Japan, the Japan Country Commercial Guide covers the practical import environment in more depth than a rate page reasonably can, and it is written by a party with no stake in your booking.
Watch: the process behind this route
This guide covers routing and clearance for Kawasaki. The video below covers the wider shipping process that sits around it.
The Customs Clearance Process: A Comprehensive Guide — ShipERP by ERP Integrated Solutions. Published on YouTube by a third party; we link it because it explains the process well, not because we produced it or endorse the provider.
Customs clearance in Japan
Duty and tax position, certification, typical port dwell and what actually holds shipments at this border — plus who files the entry.
Japan clearance requirements →Priced routes to Japan
- Shekou to Hitachinaka FCL Ocean Freight Rates | 20GP & 40HQ
- Shipping a Container from Shekou to Tokyo: Cost & Transit
- Nansha to Moji FCL Ocean Freight Rates | 20GP & 40HQ
- Shekou to Moji FCL Ocean Freight Rates | 20GP & 40HQ
- Shipping a Container from Shekou to Yokohama: Cost & Transit
- Nansha to Osaka FCL Ocean Freight Rates | 20GP & 40HQ